TerraMend 10 gallon Kit -Crack and Spall Repair
TerraMend 10 gallon Kit -Crack and Spall Repair
Couldn't load pickup availability
Rapid Concrete Mender | 100% Solids Polyurea Repair Material
Fast-setting repair material designed for rebuilding control joints, filling cracks, and repairing spalled concrete prior to coating applications.
This 100% solids polyurea mender is built for contractors who need speed, strength, and grindability. It allows for quick repairs and same-day coating in a wide range of temperatures.
Key Benefits
- Ready to grind in approximately 30 minutes
- Wide application temperature range from -20°F to 130°F
- Self-priming and self-leveling
- Develops high strength quickly
- Excellent for crack repair, joint rebuilding, and spall repair
- Can be mixed with dry aggregate for larger repairs
Common Uses
- Crack repair
- Spall and surface damage repair
- Control joint rebuilding
- Surface prep prior to polyurea, polyaspartic, or epoxy coatings
Application Overview
- Ensure surface is clean, dry, and properly prepared
- Mix equal parts A and B thoroughly
- Apply directly into cracks or damaged areas
- Allow material to cure
- Grind flush before coating
Preparation
New concrete must cure for a minimum of 28 days prior to application. Remove all paint, coatings, adhesives, oil, dust, and debris. Surface should be clean and mechanically profiled.
For larger spalls, cut a vertical edge at least 1/4 inch deep around the repair area to improve adhesion.
Mixing
- Mix equal parts A and B
- Mix for a minimum of 20 seconds
- Do not mix more than 2 quarts at a time
- Pot life is approximately 5 minutes
- Larger volumes will cure faster
Coverage (Approximate)
- 1/8 inch x 1 inch crack = 154 linear feet per gallon
- 1/4 inch x 1 inch crack = 77 linear feet per gallon
- 1/2 inch x 1 inch crack = 39 linear feet per gallon
Storage
Store tightly sealed for up to 12 months in a dry environment between 55°F and 85°F. Keep out of direct sunlight.
Packaging
Available in 2-gallon kits and 10-gallon kits.
